Ledfire Professional SM

$0.00

Surface Mounted Emergency Luminaire

Features

  • Non-maintained operation
  • Soft-start charger to reduce building load
  • Lowest energy consumption (avg. <0.25W)
  • Selectable discharge rating for hazardous areas
  • Fast emergency switch-over (<0.5s) for high-task areas
  • Long life electronics
  • High Quality Lithium battery (LiFePO4) and smart charger
  • Standalone (SPU)
  • Self test (AS2293/ IEC62034
  • DALI (IEC62386)
  • Ektor wired monitored system

Selected Models

  • 10 Years Design Life – 100,000 hours at max. ambient
  • 10 years design life at max. ambient
  • Wireless meshing system
  • Wireless monitoring via Ektor Lynk
SKU: Ledfire Professional SM Category: Tags: , ,

Mechanical

Body MaterialPolycarbonate
Fitting Colour
EV-LEDFIRE-SM-B
EV-LEDFIRE-SM-PRO-B-LK
Black
EV-LEDFIRE-SM
EV-LEDFIRE-SM-PRO-LK
White
Installation TypeSurface mount
IP RatingIP20

Electrical

Electrical RatingClass II
Input Frequency50 Hz
Input voltage230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage3 W
Standby Power0.25 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Working Temp Range0 to 40 °C

Lamp

CCT ConfigurationSingle
CRI>80

Colour temperature

CCT6700K
LED Wattage4.3 W

Driver

DimmableNo
Driver IncludedYes
Integrated DriverNo
Driver Type
EV-LEDFIRE-SM
EV-LEDFIRE-SM-B
DALI DT1 Emergency
EV-LEDFIRE-SM-PRO-B-LK
EV-LEDFIRE-SM-PRO-LK
Wireless (IEC62386-104) with DT1
Wiring TypeRe-wireable terminal block (5 pin)

Emergency (EM suffix)

Replacement Battery Code01303
Emergency ClassificationC0:D63, C90:D63
Emergency Control
EV-LEDFIRE-SM
EV-LEDFIRE-SM-B
DALI Monitored (DT1)
EV-LEDFIRE-SM-PRO-B-LK
EV-LEDFIRE-SM-PRO-LK
IEC62386-104 (Wireless DT1)
DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202.
IEC62386-104 ~ Supports wireless test and monitoring over IEC62386-104 using IEC62386-202.
Emergency Duration90 mins
Emergency Lumen Output370 lm
Emergency ModeNon-Maintained
Emergency Output Power4300 mW

Compliance

Product Design Life10 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.
Standards
  • AS/NZS 60598.1
  • AS 60598.2.22
  • AS/NZS 61347.1
  • AS/NZS 61347.2.13
  • AS CISPR 15
  • AS/NZS 2293.3

Warranty

Commercial Use Warranty5 RTB (Total 5 Years)
Product Height53 mm
Product Length230 mm
Product Width230 mm
EV/LEDFIRE/SM
EV/LEDFIRE/PRO/4/1_dimensions
EV/LEDFIRE/PRO/2/1_dimensions
DALI DT1 Emergency
Ordering codeItem codeDescriptionAvailability
01689EV-LEDFIRE-SMLedfire Surface Mounted Emergency Luminaire -D63
01690EV-LEDFIRE-SM-BLedfire Surface Mounted Emergency Luminaire Black - D63
Wireless (IEC62386-104) with DT1
Ordering codeItem codeDescriptionAvailability
10209EV-LEDFIRE-SM-PRO-B-LKEktor Lynk Ledfire Surface Mount EM Luminaire - D63 - Blk - PRO W/wireless
10208EV-LEDFIRE-SM-PRO-LKEktor Lynk Ledfire Surface Mounted Emergency Luminaire - D63 - PRO W/wireless

*Auto generated datasheet (beta)
Ordering codeItem codeDescriptionAvailability
01303EV-3000mAh-6.4V-LiFeP04Battery- Stick 3000mAh 6.4V- 2 Cell LifePO4
11967EV-DAUGHTERBOARD-LKEktor Lynk wireless daughterboard
03923EV-LEDFIRE-SM-CASELedfire surface mount Weatherproof case IP66
02004EV-RODMOUNT-BLKRodmount Brackets only for roof and luminaire body - Black (Rod size -25mm)
01990EV-RODMOUNT-WHTRodmount Brackets only for roof and luminaire body - White (Rod size 25mm)
EV/LEDFIRE/SM
IES File

IES File


EV/LEDFIRE/SM/B
IES File

IES File