In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Standby Power
3.3 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Colour temperature
LED Wattage
0.95 W
Driver
Driver Type
Fixed output
Driver Included
Yes
Integrated Driver
Yes
Dimmable
No
Wiring Type
Re-wireable terminal block (4 pin)
Emergency (EM suffix)
Emergency Mode
Maintained
Emergency Classification
EV-BOXIT-WALL-24M
C0:E2, C90:E2, C180:C2
EV-BOXIT-CEILING-24M
C0:E2.5, C90:E2.5, C180:E2
Emergency Output Power
950 mW
Replacement Battery Code
01307
Emergency Duration
90 mins
Viewing Distance
24 m
Decal Size
340 x 150 mm
Compliance
Standards
AS/NZS 60598.1
AS 60598.2.22
AS/NZS 61347.1
AS/NZS 61347.2.13
AS CISPR 15
AS/NZS 2293.3
Warranty
Warranty
5 Year Warranty, First 2 Years Onsite
The total warranty period is shown above. Where an on-site period is listed, the first years are covered on-site, with return-to-base coverage for the remainder. For full warranty details and claim instructions, please refer to our Warranty page.
